We just received some beta on new pricing for the Ezee-Feed Infeed and Outfeed system. If you haven't heard about it yet, the Ezee-Feed Infeed/Outfeed System was created by Lee Jesberger, a professional woodworker in New Jersey (www.prowoodworkingtips.com). The System creates a better way to safely cut rough lumber, plywood, MDF, melamine and other sheet goods without having to get assistance from another person. Retailing at $279, the Ezee-Feed is the perfect solution for both the large production shop and the small garage or basement shop; it reduces back strain and kickback while increasing shop production and efficiency.

The Infeed-Outfeed system is mounted to and removed from a table saw in seconds with specially engineered brackets that adjust to fit onto nearly any table saw. It will then easily move to your Shaper or to your router table to assist in making moldings. The Ezee-Feed basically mounts to sliding brackets on a 4' track for multi-positional use.

With the Ezee-Feed Infeed and Outfeed system, you never have to lift the full weight of a sheet of plywood again and you can stand at the edge of the saw, instead of the end of the sheet. This system will permit you to accurately rip to under 1/32" on full sheets of plywood consistently, with no burn or blade marks. The EzeeFeed can also straight line rough lumber through a saw in one pass for a glue quality joint, instead of the typical six to ten passes it would normally take through a Jointer.

The Ezee-Feed Infeed Outfeed System creates a safer job environment by increasing the saw's footprint. Constructed from 16 gauge steel with welded joints, the units have 12 transfer balls that permit 360 degree movement of the sheets with no resistance. The unit also has a built-in side roller which eliminates the need to ever lift the full weight of the sheet while ripping it. And when you are not using it, the Ezee-Feed System folds flat to easily hang on the wall (and out of the way).

For more information, to watch the video, or to purchase the Ezee-Feed Infeed Outfeed System, go to www.ezee-feed.com.